EMC technology developed Removable shielded room
Beijing EMC Technology Limited (EMC)--world's leading EMC conduction immunity test equipment system developers and manufacturers, developed by my넶3 2016-01-12
EMC / China 2015 Fourteenth EMC exhibition ended넶1 2015-11-04
Vehicle components/modules test chamber
The vehicle components/modules test chamber is a semi-anechoic chamber designed in accordance with the requirement of standard, which can be used to fulfill compatible radiation immunity test(ISO11452-2,SAEJ1113) and radiation emission test(CISPR25). Typically it includes the main anechoic chamber, shielding control room and amplifier room.
EMCT-3 is a semi-anechoic chamber designed in accordance with the test distance 3m, including the main anechoic chamber, shielding control room and amplifier room (optional conduction test shielding room) for compatible radiation immunity test(in 3m distance) and radiation emission test in 3m distance.
Our 3m c
Movable shielding room
reverberation Chambers (RVC), this product is mainly aimed at shielding
effectiveness measurement for electrical connectors designed and built.
Removable RVC is a compact, high-performance portable RF test small shielded
rooms, is ideal for cable testing, military and civil products.
10m Semi Anechoic chamber
Our 10m chamber can come with the mandatory regulation contained in the following standards, such as CISPR, EN, IEC and GB, GJB, FCC.
STANDARD TEST EQUIPMENT
compatibility issues become increasingly prominent , the state of
electromagnetic compatibility requirements of electronic products is also
increasing. Whether military and civilian , should follow the national or
industry standards for electromagnetic compatibility standard test , which has
become a standard inspection of product quality. In order to meet customer
requirements and national standards , the company offers a f
Oscilloscopes eXpansion - ScopemaX
with a real-time oscilloscope , you can increase the bandwidth expansion to 12.5
GHz real-time oscilloscope and data measurement capabilities improve ultrahigh
twice , but also provides powerful jitter analysis capability . This is compared
with the purchase of a new higher bandwidth costs RTO has a corresponding
bandwidth capability , you can save 75 percent of costs.
Signal Integrity Analyzer - Clock Analysis C Series
signal 3.5GHz ~ 12.5GHz , deterministic and all jitter modulation and PLL
characteristics (PLL transfer function and indicate FIG ) , with an easy to use
tool to measure rise / fall time , amplitude, frequency and pulse width , adding
more channels to measure the skew clock fanout or input / output jitter.
Signal Integrity Analyzer - Data Analysis D Series
but also can be completely up to 3.5Gb / s ~ 12.5Gb / s data signal duplication
or random serial data eye pattern test , jitter analysis and complete diagnosis
ideal for SATAI, SATAII, PCI Express, 1x and 2x Fibre Channel and XAUI analysis
, measurements have SSC signals or depict SSC itself , adding more channels
measure the data bus or with a bit clock and multiple data lines memory
Signal Source Analyzer -GIGAMAX SSA
can be measured in the frequency , magnitude and timing of the three domains
SSA use of common industry terminology and intuitive graphical easily
identifiable so that designers can easily understand and All results
interpretation , it can also convert the results from any one of the three
domains to other domains , making it the oscillator analysis equipment "Rosetta
tools , active monopole antenna can drive any receiver has impedance of 50W
and can be FCC, MIL-STD and TEMPEST standard tests , while passive monopole
antenna can be used transmitting, implementation of shielding effectiveness and
markets high-performance loop antennas that can be used in a very wide range
field tests , either as shielding effectiveness of a test device ( in accordance
with MIL-STD 285 and NSA 65-6 standards) or independent testing for safety
indicators , these loop antenna is an effective, low- cost solutions.
Double Ridge Horn Antenna
have a very good performance in the 170 MHz to 40 GHz frequency range.
Electrostatic discharge generator -SESD 216
standard defines the discharge , relying on the device under test (EUT) and
test set- laboratory testing.
RF Power Amplifiers
good linearity while greater bandwidth and gain , the last stage in a typical
solid-state push-pull amplification , and therefore has excellent performance
and better stability intermodulation characteristics. Meet all the performance
and characteristics of EMC / EMI standard test (IEC61000-4-3 RF immunity
standard ) requirements.
Emissions Reference Source (ERS)
LN-16 Line Impedance Stabilization network
mains network (AMN). When the test series with the DUT power feed line. It is
within a given frequency range , offers standard 50 -ohm load impedance
disturbance voltage measurement , and test equipment and power supply isolated
from each other.
Conducting reference source
be used to check the test equipment , state of the environment , prevent
measurement errors , and EMC laboratories have a consistent standard measurement
Near Field Probe RF1
Near- field probe set RF2
RF 3near-field probe set
The near field probes type RF3 mini set have special electrically screened miniature heads which are designed for detailed magnetic field measurements in the layout and component range. Magnetic fields can be measured with a resolution of under 1 millimeter for comparison purposes.
RF Test Probes
detection and injection tests
compatible scanner , capable of 3 linear axes (x, y, z) or 4 axes ( 3 linear
axes : x, y, z and α rotation) motion , resolution up to 5μm particularly
suitable for electromagnetic interference scan integrated circuit (IC) as well
as mobile phones and other handheld devices.
IC test board
manufacturers and users , and its structure and continuous ground plane
ensure proper measurement reaches GHz.
S2 magnetic field probe set
E1 immunity development system
The E1 immunity development system is used to quickly and precisely determine the causes of functional faults within the EUT. The user is able to find out how and why the individual conducting tracks and components are influenced. This allows him/her to initiate the optimum corrective action directly on the circuit or
Three multifunction scanners
products , the system includes a XYZ motion mechanism , a spectrum analyzer
a near -field probe between the spectrum analyzer and computer (with software)
and one for GPIB card communication.
The RSE-series is characterized by the 1mm step size, the Heat scanning feature and it's large working area (up to 600 x 400 x 200 mm). The RSE-series come in three different sizes.
electromagnetic radiation is very important. The traditional electromagnetic
simulation tools are static or similar static TEM analysis. However,
frequency becomes higher , TEM method can not accurately calculate parasitic
electromagnetic field propagation ( such as secondary field , three games
etc.) , but these parasitic field just seriously affect circuit delay
crosstalk . Because the operating frequency increases ,
EMI analysis tools
Portable test chamber
5m Anechoic chamber
EMCT-5 is a semi-anechoic chamber designed in accordance with the test distance 5m, including the main anechoic chamber, shielding control room and amplifier room (optional conduction test shielding room) for compatible radiation immunity test(in 3m distance) and radiation emission test in 5m or 3m distance.